Phone still seems to work Ok, but gave me a scare. Finally i found this brilliant suggestion, try it and it work immediately! Plus, it's not as simple as getting a new lock button and fitting that in - it could actually be that there's a tiny part missing from the power button flex Plug your iPhone USB cable into the phone (no need to plug the other end into anything) and grip the part right where it is plugged into the phone. have a peek here
Lint from your pocket or old Cheetos dust can find its way into the small crevice encircling the home button.In order to clean this out properly you want to use isopropyl Demetre - 09/08/2013 Reply If you use a hair dryer to soften the glue, it seems to do the trick. Reply 1 Rajesh Jothi 3 years ago for past two days i struggled to overcome this problem. Hold down Power Button till display shows the Shutdown screen. http://www.macworld.co.uk/how-to/iphone/how-fix-broken-iphone-home-button-stopped-working-iphone7-3463402/
Joshua - 05/17/2013 Can we get a better photo of where rubber piece goes? I've solved in it ONE second!!!!! When reinstalling the display, carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the steel frame.
Take your time with a clean and organized space and it is rather fun. US District Judge Gary Feess threw out the power button case, though, dismissing the claim because the plaintiffs failed to prove a breach of warranty and RICO. Cool! Iphone Home Button Stuck and no more audio from the ear piece.
This guide should help you get to where you need to go in the device. Iphone 4 Home Button On Screen Then, gently push down on the 30-pin connector, so that it pushes up behind the home button. What is it for? my site Such a strange "trick" could fix this problem.
nickzielinski - 04/29/2015 Reply anobody please tell me which one screwdriver i should use to loose the flat-headed screws? Iphone Home Button Repair Cost Just make sure that you don't put pressure on the login board to get it into place, take your time and ease it in. sgoodwin - 09/22/2012 If it's square then it could be the piece that sits next to the dock connector on top of the little black speaker? Here's How To Fix It Yaara Lancet July 30, 2012 30-07-2012 3 minutes Is The iPhone Home Button Not Working?
Give me a break.
So I didn't install it back. Iphone 4 Home Button Replacement Thanks http://zytecworld.com/2011/11/25/iphone-... Home Button Not Working On Iphone 6 Reply natalie blundell August 2, 2012 at 9:33 pm omg that was amazing it worked like straight away ive only had my iphone a couple of weeks and it allready has
It will clean the contact point between the home button and the frame. http://unmovie.net/home-button/iphone-5-button-not-working-well.html It only takes a grain of sand, or a burr on the spudger and you're risking a potential cell rupture and potential fire. Using a cotton swab, eye dropper, or tissue, apply 2-3 drops of the isopropyl alcohol directly to the home button, avoiding the screen. Steve this probably happens to people all the time. Home Button Not Working Android
If you are installing a new rear panel, be sure to remove the plastic protective sticker from the inside of the camera lens and the sticker from the large black area Hold the power button until u get the slide to turn off 3. It's not in the description and it came out when I disconnected the screw. Check This Out If it didn't you may want to try restoring your iPhone before continuing to the second method.Method 2: Realign the docking port There is a chance that through normal wear and
Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws (second image). Home Button Not Working On Ipad My personal experience suggests that all the Touch ID equipped iPhones have reliable Home buttons that appear not to be prone to failure - although if your experience differs, please do Should i try it anyways?????
brian - 12/08/2014 Reply I used an elastic band pulled taught over the blade of a flat headed screwdriver to hold the nut (beneath the yellow screw) in place. tomasfernandez257 - 09/12/2015 Reply Add a comment Add Comment 1024 Step 5 Edit Use a plastic opening tool to gently pry the battery connector up from its socket on the logic Sad I too have done screen replacements on other phones. Iphone Home Button Single Click Not Working I used a tiny tweezer to aid with re-routing the cables and it was FAR easier.
So I use the plastic opening tool on the other side to remove really gently the battery, it was really really stucked with the glue... I have to did this with so much force. I plugged it in and immediately the screen displayed a battery with a thin red line (illustrating no charge). this contact form Good Luck. (Images courtesy of Google Images) Was this answer helpful?
Oturum aç 622 168 Bu videoyu beğenmediniz mi? Then blow more and clean it as much as you can. Do not attempt to pull it through by force, or it will tear. crimney - 02/03/2013 I also used very fine tweezers (from a swiss army knife) to hold the washer and screw from the side as I positioned the screw over the hole,
It's worth a try before you purchase a new home flex. Assistive Touch is one of the accessibility features in iOS 5 that can be served as a workaround, if your iPhone home button is broken.How to Enable Assistive Touch to Access revher - 09/19/2014 you have to remove the battery for digitizer replacement, however i would suggest removing it at the very last stage, i.e. I took my phone to the Apple store twice, to a 3rd party guy once - and all of them said I need a new phone.
It is easier to see if you click on the view huge link to blow up the photo. Turn on Assistive Touch and a small circle will appear on the screen. drathbun - 10/28/2012 Reply My ribbon cable was also longer than the original.