offmains 61,251 views 4:09 Loading more suggestions... And... This will allow easier access for disconnecting the remaining cables. I performed a soft reset and the issue was resolved. Check This Out
Was this answer helpful? If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used. I did all these things but apparently, when I reassemble i get no sound from the earphone and the auto brightness does not work at all. The plastic tab may be white (instead of black) on some iPhone models.
Worse, you can't power off because the screen is locked and the power-off slider can't be moved to the right. Installation is required.$2.99From AustraliaEarpiece Speaker For iPhone 3G 3GS And Nokia 5310 NEWThis part should be installed by a professional technician! The IF137-008-1 kit would benefit with the addition of two replacement screws in case the buyer loses the original screws. On 2 occasions, I've had to gently lever up the frame/lcd with thin plastic sptum or ccard instead.
Jun 24, 2009 5:01 AM Helpful (0) Reply options Link to this post by pureskinhealth, pureskinhealth Jun 24, 2009 5:02 AM in response to Allan Sampson Level 1 (0 points) Jun all were 16GB, and what your describing has never happened to me. Sign in Transcript Statistics 30,699 views 77 Like this video? Iphone 6 Ear Speaker Not Working Get your iphone back to sounding great.
Turn the spudger around and use the pointed side to detach the two clips securing the top of the assembly. Iphone 3g Speaker Replacement Apple iPhone 3G 3GS. There is no way you can open the phone 45 degrees as shown without ripping the cable as I did. my response Watch Queue Queue __count__/__total__ Find out whyClose Earpiece Repair - iPhone 3G & 3GS How to Tutorial iPhoneRepairMia SubscribeSubscribedUnsubscribe62,10862K Loading...
Transcript The interactive transcript could not be loaded. And then remove Wi-Fi antenna cable cover. I'm a former digital systems specialist and dealt with these on an almost daily basis with no trouble, ever. Watch QueueQueueWatch QueueQueue Remove allDisconnect Loading...
orangey456 234,945 views 8:26 iPhone 3GS needing headphone socket replacement - The Computer Room Nottingham - Duration: 7:11.
Use extreme care and caution when performing a repair on any device. Iphone 3gs Speaker Not Working Introduction Has your ear speaker stopped working? Iphone 3gs Repair Hi yes you are correct, I discovered my problem was really that cable #2 had come loose.
At this point, before turning on the device to test it, you might want to make sure the sim card is installed. http://unmovie.net/iphone-3g/iphone-3gs-1-speaker-not-working.html iMore 22,545 views 7:27 Official iPhone 3G / 3GS Battery Replacement Video & Instructions - iCracked.com - Duration: 16:50. Position the suction cup on the screen directly above the home button. Cancel midnightgolfer Rep: 1 Posted: 05/25/2012 Options Permalink History I had this problem, and it required a couple of tries to get the #3 ribbon connector to seat, and then click Iphone 3gs Manual
Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz? I referenced this photo when putting the speaker in a replacement mid frame, and the speaker did not work. I just installed this unit for a friend's phone, but don't have the sim card here -- it is with the friend. this contact form thanks ciampa - 03/05/2011 Reply Hi; I changed my LCD but is white the whole time I tried unplugging 1 and plug it back but it does work?
it may result in void of warranty. Quote from ouimetnick: Weird. I have the exact same problem...
Again, resetting the phone resolved the issue. Otherwise the 3G will boot up, and you will get a message "No SIM card installed", and the screen will be locked. Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly. I now need to replace the dock connector as well.
Working... Nicholas Ouimet - 12/03/2009 Reply Quote from ouimetnick: The Phone's touch screen will work with out a sim. Take off metal wristwatches and generally remove any other metal before starting the repair. navigate here I've taken all of my 3G apart.
After using a cheap Go Phone to get me by for the weekend, I'm in complete awe of my daughter's ability to text on those things! Loading... To reassemble your device, follow these instructions in reverse order. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site.
I would carefully look at everything touched in the process and make sure it is correct or worst case remove it all and start over. Tyephone 36,648 views 3:25 iPhone 3G and 3GS Complete Strip and Re-Build Repair Guide - www.AppleiPodParts.com - Duration: 39:03. Loading... I now need to replace the dock connector as well.