Home > Power Button > Iphone 4 Standby Button Not Working

Iphone 4 Standby Button Not Working


Bookmark the permalink. 8 thoughts on “Tiny problems - How to fix an iPhone 4 power button click-issue” Chris on 14-12-2012 at 11:44 said: Thanks for the guide. That didn't work because there is a little tab at the top of the connector which must fit into a tiny notch or else the connector won't lay flat properly. bfbogaert - 11/17/2012 Reply There is a metal bracket that secures the connector, that will be removed before the conector is unfasten poseido - 06/03/2013 Reply When I used a plastic When this happens, the power button cable no longer makes contact with the button, resulting in no feedback. http://unmovie.net/power-button/ipad-standby-button-not-working.html

Fingas, 2h ago save Save share View 4h 4h ago in Transportation VW says Audi software can distort emissions during tests And the EPA is reportedly investigating. It felt limp and would not respond to a press. You should only clean metal to metal contact points, such as the contact area between the EMI fingers and the metal case on the speaker enclosure. US District Judge Gary Feess threw out the power button case, though, dismissing the claim because the plaintiffs failed to prove a breach of warranty and RICO. https://www.engadget.com/2014/04/02/how-to-power-off-or-lock-the-screen-of-an-iphone-with-a-broken-p/

Iphone Power Button Not Working How To Turn On

After replacing screen camera app now stuck on shutter? If you aren't ready to trade in your iPhone 4 just yet, a power button replacement isn't too terrible and will take you around 60 minutes if you're being careful. Should sit flat and square. Looking forward to replacing the battery in my other phone that has the pentalobe screws.

However the JIS #000 also in the kit did fit quite well. ryanporter - 03/18/2013 Reply Be Careful of a tiny metal piece attached to the black bit on top that acts as the screw spot for the blue screw. yujin yamada - 07/18/2011 Reply Somehow i twisted the head off of the 4.8mm screw (ground) during reassembly and not i have terrible wifi. Iphone 6 Power Button Not Working Cancel stephanie Rep: 1 Posted: 12/27/2011 Options Permalink History if im not under warranty anymore but my lock button is jammed is there anything apple can do about it or should

The screw is totally messed up, I can't unscrew it because the screwdriver doesn't fit in the screw/doesn't unscrew it. How To Fix Iphone 4 Power Button Without Taking It Apart nsolis - 12/18/2010 Reply Took me a few tries to get the camera seated properly - if it's not seated correctly, you'll have problems attaching the WiFi antenna. May 16, 2013 2:46 PM Helpful (0) Reply options Link to this post by oa_gd, oa_gd May 16, 2013 8:53 PM in response to CwissyBwear Level 1 (0 points) May 16, http://www.macworld.co.uk/how-to/iphone/how-fix-broken-iphone-lock-button-power-buttons-stopped-working-3464222/ I loosened it up a bit and the SIM card tray was able to fit flush.

It'll take some time to arrive. Iphone 4s Power Button Replacement It has a hooked shape on one side which fits between the socket and the folded battery cable. The toggle will be green when the feature is enabled in iOS 7. How to fix a stuck or broken power button in a GSM/AT&T iPhone 4 More DIY help & how to's Whether you aren't sure if these are the repairs you need

How To Fix Iphone 4 Power Button Without Taking It Apart

Can I get a replacement screw? The iPhone has been plagued with power button issues since the debut of the iPhone 4. Iphone Power Button Not Working How To Turn On Anyone know where exactly it goes? Iphone 6 Power Button Stuck Werner Graser - 11/12/2014 Reply Add a comment Add Comment 1024 Step 24 Edit Use a pair of tweezers to remove the power & lock button from the iPhone.

It can stay in. http://unmovie.net/power-button/iphone-4-top-right-button-not-working.html bfbogaert - 11/17/2012 Reply Use an #000 fine screw driver to remove two screws from iPhone 4s! This might come loose. Now I'll know when I'll need to change it. Iphone 6 Lock Button Stuck

I had the logic board put back in and then found this little thing hanging out. Cancel amanda Rep: 1 Posted: 11/08/2011 Options Permalink History mines very tight and I don't want to get it fixed by the apple store, is there anything I can do myself? Had a replacement iPhone 4 roughly 6months back, 2 months back button started to feel funny/sticking. http://unmovie.net/power-button/iphone-on-and-off-button-not-working.html C Khripin - 03/23/2015 hi, the small gold prong (step 19) in my phone is fragile what should i do?

Julian Boilen - 02/10/2014 Reply My small gold prong fell off, what do I do now? Iphone 6 Lock Button Stuck Down unlockeur - 04/05/2015 Reply I found this explanation about how to reattach the f**g clip: "I normally use a pair of tweezers. ifixit instructions arent detailed enough.

I fotgot all abouy that.. 10/07/2015 by jadebell1586 Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz?

kellicaudill - 02/15/2015 Reply Putting the antennae cover back in place is impossible without a good photo. Stefan - 12/16/2012 Reply Add a comment Add Comment 1024 Step 10 Edit Carefully peel the dock ribbon cable off the logic board and the lower speaker enclosure. Like us! Iphone 6s Power Button Stuck May 16, 2013 3:55 AM Helpful (0) Reply options Link to this post by jamtan, jamtan May 16, 2013 5:36 AM in response to CwissyBwear Level 1 (0 points) May 16,

Does not seem to actuate like normal. I'll let you know how it holds! Put the yellow tape (with the actuator helper) on the original button. this contact form splaye - 06/23/2014 Add a comment Add Comment 1024 Step 4 Battery Edit Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

For the other part of the guide, it was a piece of cake and I'm a bad bad handyman :) Thanks for the guide! If your pentalobe driver won't turn it, then it is not loose enough, or the end of one of the small screws has broken off in it (actually fairly common). The website bellow suggests I lost a microscopic jumper that enables the front camera. Any advice Anastasia Weigle - January 29 Reply Add a comment Add Comment 1024 Step 17 Edit Use the edge of a plastic opening tool to gently pry the following connectors

nickbits - 06/01/2012 Reply Take care to put the small ruber piece into place to protect the ribon cable for the lcd dyplay Hanspeter - 10/04/2012 Reply The smallest screw below This is due to the JIS bits "thinner" design to prevent camming out of the slot. Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz? I have lost mine...

racaruso90 - 12/30/2011 Reply On my phone the "washer" that the 1.4mm screw goes into I think is actually the mounting post that had come detached. Took the phone to apple they said could not be fixed but they could give me a new phone for 119 pounds........ Vit Rozehnal - 11/09/2013 Reply It won't hurt anything. Steve or someone -- can you explain what is meant by this?

Tap and hold if you want to activate the iPhone's power-off slider. In severe cases, the power button actually recesses into the casing. fasthans - 10/20/2011 Note that when re-installing the logic board, do not forget about the antenna connector near the bottom of the phone. Eric - 10/30/2014 Reply Mine did too but I don't notice anything wrong yet???